 |
|
|
Cetol Marine is a unique high performance exterior wood treatment. It is the easy to apply low maintenance alternative to wood oils and varnishes. Its durable attractive translucent satin finish has been specially formulated with two main aims in mind:
- To protect your wood and keep it looking beautiful throughout the season, and
- To be as easy as possible to apply and maintain.
|
|
| How is Cetol Marine different from other wood treatments and varnishes? |
Cetol Marine contains synthetic transparent iron oxide pigments, which shield the wood against sunlight. This effectively protects the wood’s lignin, a key component in its strength, which is degraded by exposure to UV. It is these pigments that give Cetol Marine its attractive deep golden appearance.
Cetol Marine’s durable surface film protects the wood from the elements and marine environment. It has excellent weathering properties and, importantly, is flexible. This characteristic means that its protective shell is very resistant to impact damage and abrasion, and allows for natural expansion and contraction of wood. It also prevents flaking that is associated with some ageing varnishes.
Cetol Marine penetrates the surface of the wood on application, providing long-term water repellence, protecting the wood from water damage.
Cetol Marine is microporous, allowing the wood to breathe. This helps to keep the moisture content of the wood stable as it allows it to escape from the wood. It also means it may be applied to wood with a higher moisture content (up to 18%) compared to varnish application.
Cetol Marine is formulated to a lower viscosity than most varnishes. This allows excellent wood penetration, easy, rapid application of coats and superb flow and levelling meaning there is no need for sanding between coats. This, combined with its quick drying, makes it a really easy-to-use product.
Cetol Marine is formulated for use on all marine wood types, and is particularly suitable for tropical hardwoods like teak. |
|
| Where should I use Cetol Marine? |
Decks
Decks are subject to damage caused by direct exposure to harsh ultraviolet rays, high moisture levels, standing water, and extreme temperature changes. In addition, boat decks experience further damage from heavy foot traffic, movement of gear and chafing by lines. In such areas, any film-building coating may experience some degree of peeling as the elements literally “push” off the coating. Apply Cetol Marine as described in the application section.
Brightwork
In general, the trim, mast, railings and other exterior wood areas should be maintained annually. Check these areas occasionally for signs of moisture entry through unsealed end grains. |
|
| What products are available in the Cetol Marine range? |
Cetol Marine Natural
A durable translucent satin protective wood treatment, formulated with a special alkyd resin and high quality synthetic UV-absorbing pigments. Produces an attractive golden tint to hardwoods. For interior or exterior use.
Cetol Marine Teak
Identical to the Cetol Marine Natural but formulated with different pigments to produce a darker appearance. |
|
| Next page |
Application do's and don'ts for Cetol Marine |
|
|
|
|
|
 | | Datasheets, sales outlets and lots of useful boat maintenance information packed into an easy to use CD. Click here to order |
|
|
