 |
|
|
Ask any boatpainting professional and he'll tell you that you cannot 'work down' to a high quality finish - you have to 'work up' and that means care and attention to preparation of the surface prior to applying topcoats.
The Interlux range of primers is designed to help you make this unseen but nevertheless vital area of maintenance as simple and efficient as possible. Care and attention in this area will maximise the performance of any topcoat and ultimately provide greater value for money in the longer term. |
|
| Epoxy Primekote |
Epoxy Primekote is a multi-purpose two-part epoxy primer for use above the waterline. Epoxy Primekote is designed for use with Perfection. |
| Fibreglass No Sand Primer |
|
Low V.O.C. Fiberglass No Sand Primer YPA142 is a water based No Sand Primer used below the waterline for priming fiberglass to eliminate the difficult job of sanding prior to painting when using Micron® Optima or Fiberglass Bottomkote® Aqua. |
| Fiberglass No Sand Primer |
|
Do away with the need to sand before applying Interlux antifouling paint by using Interlux Fiberglass No Sand Primer YPA200. Fiberglass No Sand Primer is designed to eliminate the need to sand prior to applying antifouling paint to new or unpainted boats. |
| Pre-Kote |
|
Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. |
| Yacht Primer |
|
Yacht Primer is a quick-drying, anticorrosive, rust inhibitive primer for use on suitably prepared metals. |
| Primocon |
|
Primocon is an anticorrosive primer for all underwater metal surfaces. It provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass. Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings |
| Viny-Lux Primewash |
|
Viny-Lux® Primewash is a two-part zinc chromate, self etch primer that is used as a metal conditioner for adhesion prior to application of other paints on metal. |
| Outboard and Outdrive Aerosol Primer |
|
Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application of Tri-Lux II, Tri-Lux II Aerosol or Micron 33 Aerosol. |
| Interprotect 3000/3001 |
|
V.O.C. compliant two part epoxy water barrier with Micro-Plates®. Can be used down 32ÞF/0ÞC. High Solids, works to temps below 32ÞF and has long overcoat window/times. |
| Interprotect 2000E |
|
A superior two-part epoxy water barrier with Micro-Plates®, used in the prevention and repair of osmotic blistering. |
| VC Tar2 |
|
Two part epoxy water barrier for use with VC®17m Thin Film antifouling paint. |
| TBT Sealer |
|
TBT Sealer is designed for use when converting from a TBT containing antifouling to Micron® 66® or Trilux® 33™. |
|
|
|
|
 | | InterProtect® 2000E The product of choice for Boat Builders and Repair Yards since 1985. | |
|
| You can read how our products have been used by boaters all over the world in yachtpaint.com's projects section..... |
|
|
