A new high gloss, two pack, linear polyurethane. Interspray 900 has been formulated to offer outstanding spray characteristics, making it ideal for professional application to large yachts.
* Spray application
* Wide range of thinners available, enabling excellent results to be achieved over a broad temperature range
* High flow characteristics give "wet look" gloss
* Available in 21 standard colours
Interspray 900 cures to an exceptionally high gloss, with a sharp distinction of image (D.O.I.). Its inherently durable finish is improved further by the addition of the latest technology in ultraviolet absorbers. |
|
| Colour |
YZA183-Platinum Grey, YZA184-Mediterranean White A184, YZA192-Off White A192, YZA194-Oyster White A194, YZA198-US Matterhorn White A198, YZA216-Royal Blue A216, YZA255-Vivid Red A255, YZA900-Glazecoat, YZA905-Off White Revisited, YZB000-Snow White, YZB663-Jade Mist Green B663, YZB993-Oxford Blue, YZE294-Chilli Red E294, YZF635-Navy Blue F635, YZF991-Mauritius Blue F991, YZK990-Flag Blue, YZS070-Cream S070, YZS117-Lemon Yellow S117, YZS299-Rochelle Red, YZS936-Lauderdale Blue S936, YZU052-Eggshell White U052, YZX000-Special colours, YZY999-Jet Black - Custom colours are available but require longer lead times. Please consult International. |
| Finish |
Full gloss |
| Unit Size |
1.5 Lt |
| Specific Gravity |
1.1 |
| Volume Solids |
50% |
| Mix Ratio |
3:1 by volume , Converter/Curing Agent - YZA901 |
| Typical Shelf Life |
2 yrs |
|
|
|
Drying |
|
10ºC |
15ºC |
23ºC |
35ºC |
|
|
| Sandable |
24hrs |
24hrs |
16hrs |
12hrs |
| Pot Life |
4hrs |
4hrs |
3hrs |
2hrs |
|
|
Note:Pot life refers to the Working Pot Life. |
|
Overcoating |
|
Substrate Temperature |
| |
10ºC |
15ºC |
23ºC |
35ºC |
| Overcoated By |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
|
|
| Interspray 900 |
- |
24hrs |
- |
24hrs |
- |
16hrs |
- |
12hrs |
|
|
Note:Minimum overcoating time is when coat is touch dry. |
|
|
| Preparation |
PREVIOUSLY PAINTED SURFACES:
In Good Condition:: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper.
In Poor Condition:: Remove all previous coatings and prime the substrate.
PRIMING: Substrate preparation is covered separately on the primer datasheet.
BARE WOOD: Prime with Interprime 820 or UCP.
STEEL/ALUMINIUM: Prime with Interprime 820.
GRP: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. - Use Polyurethane Basecoat prior to topcoat application. Sand the Polyurethane Basecoat with a minimum of 400 grade wet or dry paper. Ensure the surface is thoroughly cleaned. The use of tack rags and International Wipe Down Solvent (YTA002) can help achieve the required level of cleanliness. During the cleaning process, wash down solvent or water must not be allowed to dry on the surface. Residues must be removed using dry paper wipes. Any sanding residue remaining on the surface can impair the finish. |
|
|
| Method |
Mix base and curing agent first and then thin as required. Accelerator may be necessary at temperatures below 30°C. Consult Interspray Accelerator datasheet for recommended addition levels. Stir thoroughly. Allow to stand for 5 minutes to allow entrapped air and gases to escape. For the best finish, the first coat should be applied thickly enough for even coverage and flow, but do not attempt to achieve full opacity. Do not apply a dry tack-coat first. Leave first coat until it is "touch dry". Apply a full coat. When this coat is touch dry, apply a further 1 or 2 full coats (depending on colour) to achieve full coverage. If more paint needs to be applied, wait at least another 24 hrs before proceeding, to avoid solvent entrapment. |
|
|
| Hints |
Mixing Stir contents of each part prior to mixing. Mix the base and curing agents of Interspray 900 together at the specified mix ratio. Stir well before use.
Thinner Fast YTA910, Standard YTA915, Slow YTA920, Extra Slow YTA925, Retarder YTA930.
Thinning The choice of thinners will depend on the ambient temperature, the spray gun set up, application techniques and paint viscosity. As a general guide: 12-18°C - YTA915; 16-23°C - YTA920; 21-28°C - YTA925; >28°C - YTA925/YTA930 blended 80:20%. For fuller guidelines on thinning, consult the Professional Application Manual.
Conventional Spray For conventional spray applications reduce viscosity to 14s, DIN 4 cup or equivalent. Pressure: 3-4 bar. Tip Size: 1.0-1.4 mm.
Other If using as a deck paint, mix in non-slip additive. Full hardness is achieved after 7-10 days at 15°C/59°F. If required, a Matting Coat (YZM914) is available for use with Interspray 900. See Matting Coat datasheet for details on use. |
|
|
| Some Important Points |
Product temperature should be minimum 10°C and maximum 35°C. Ambient temperature should be minimum 10°C and maximum 40°C. Substrate temperature should be minimum 10°C and maximum 40°C. Do not use in high wind. Avoid humid conditions. Do not apply over conventional paints or flexible constructions. Do not use unless mixed thoroughly with the curing agent at specified ratio. Not suitable for permanently immersed surfaces. Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not thin with Standard Thinner 920 (YTA921). |
|
|
| Compatibility/Substrates |
Apply only over sanded polurethane finishes, International's Polyurethane Basecoat or Interprime 880. Ensure all sanding residues are removed before application of the Interspray 900 finish. |
|
|
| Number of Coats |
Half coat + two full coats minimum |
|
|
| Coverage |
(Theoretical) - 10.00 (m²/lt) 8.0-12.0 m²/lt spray. |
|
|
| Recommended DFT |
31.5 microns dry (25-38 microns dry)
|
| Recommended WFT |
62.5 microns wet (50-75 microns wet) |
|
|
| Application Methods |
Conventional Spray |
|
| Storage |
GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Interspray 900 to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
Interspray 900 should be kept in securely closed containers during transport and storage.
|
|
|
| Safety |
Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
Contains isocyanates which may be harmful to the respiratory tract. Interspray 900 should be used in a controlled atmosphere. Overspray can cause skin irritation or respiratory problems.
DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Interspray 900 cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.
|
|
| DISCLAIMER |
The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal or injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development. |
|
and International are trademarks of International Coatings Ltd. Copyright
© International Coatings Ltd 1999. |
|
Head Office
International Coatings Ltd
P O Box 20980
Oriel House
16 Connaught Place
London W2 2ZB
United Kingdom
tel: +44 (0) 171 479 6000
fax: +44 (0) 171 479 6500 |
European Region
International Coatings Ltd
Stoneygate Lane
Felling, Gateshead
Tyne & Wear NE10 0JY
United Kingdom
tel: +44 (0) 191 469 6111
fax: +44 (0) 191 438 3977 |
Asia Region
International Coatings Pte Ltd
449 Tagore Industrial Avenue
01-03 Hong Joo Industrial
Building
Singapore 787820
tel: +65 6453 1981
fax: +65 6453 1778 |
Australasia Region
Akzo Nobel Pty Limited
115 Hyde Road
Yeronga, Brisbane
Queensland 4104
Australia
tel: +61 (0) 7 3892 8866
fax: +61 (0) 7 3892 4287 |
North America Region
International Paint Inc
2270 Morris Avenue
Union
New Jersey 07083
USA
tel: +1 (0) 908 686 1300
fax: +1 (0) 908 686 8545 |
South America Region
Akzo Nobel Coatings Ltd
Rod Rap tavares, KM 18.5
Predio Administrativo 11
Butanta CEP 05577-300
Sao Paulo, Brazil
tel: +55 (0) 11 3789 2000
fax: +55 (0) 11 3789 2200 |
|
