Available Sales Codes/Colors

YPA423
Gray


 

InterProtect HS

Test
InterProtect HS is a versatile high solids, two part epoxy, that can be used above and below the waterline as a primer for all substrates. As part of a gelcoat blister repair or prevention system, InterProtect HS uses the Micro-Plate Technology to substantially reduce water migration through the epoxy to the hull surface which could lead to blistering. Micro-Plates also provide protection from corrosion for metals. InterProtect HS is a high solids epoxy which means fewer coats to reach the desired film thickness. InterProtect HS also meets the most restrictive V.O.C. regulations and helps reduce solvent emissions into the environment.

Technical Specifications

Area Above or below the waterline 
Finish/Sheen: Satin 
Pack sizes: 1 US Gallon 
Substrates:
  • Aluminium
  • GRP/FRP
  • Lead
  • Steel
  • Wood
  • Carbon Fibre
  • Cast Iron
 
Suitable for aluminum n/a 
Suitable for high fouling areas  
Application Method
  • Airless Spray
  • Brush
  • Roller
 
Recommended
No. Of Coats
  • 1.00
  •  
  •  
 
Practical Coverage
(ft²/Gal)
  •  
  •  
  •  
 
Thinner
  • Y2316N
  • Y2333N
  • Y2333N
 

The product data provided is intended as a general overview to aid product selection and as such represents typical values. For more specific application guidance, please refer to the product datasheet provided.